[−]Struct openssl::ssl::SslVerifyMode
Options controling the behavior of certificate verification.
Methods
impl SslVerifyMode
pub const PEER: SslVerifyMode
Verifies that the peer's certificate is trusted.
On the server side, this will cause OpenSSL to request a certificate from the client.
pub const NONE: SslVerifyMode
Disables verification of the peer's certificate.
On the server side, this will cause OpenSSL to not request a certificate from the client. On the client side, the certificate will be checked for validity, but the negotiation will continue regardless of the result of that check.
pub const FAIL_IF_NO_PEER_CERT: SslVerifyMode
On the server side, abort the handshake if the client did not send a certificate.
This should be paired with SSL_VERIFY_PEER
. It has no effect on the client side.
pub const fn empty() -> SslVerifyMode
Returns an empty set of flags
pub const fn all() -> SslVerifyMode
Returns the set containing all flags.
pub const fn bits(&self) -> i32
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: i32) -> Option<SslVerifyMode>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: i32) -> SslVerifyMode
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: i32) -> SslVerifyMode
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: SslVerifyMode) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: SslVerifyMode) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: SslVerifyMode)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: SslVerifyMode)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: SslVerifyMode)
Toggles the specified flags in-place.
pub fn set(&mut self, other: SslVerifyMode, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Eq for SslVerifyMode
impl Clone for SslVerifyMode
fn clone(&self) -> SslVerifyMode
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl PartialOrd<SslVerifyMode> for SslVerifyMode
fn partial_cmp(&self, other: &SslVerifyMode) -> Option<Ordering>
fn lt(&self, other: &SslVerifyMode) -> bool
fn le(&self, other: &SslVerifyMode) -> bool
fn gt(&self, other: &SslVerifyMode) -> bool
fn ge(&self, other: &SslVerifyMode) -> bool
impl Extend<SslVerifyMode> for SslVerifyMode
fn extend<T: IntoIterator<Item = SslVerifyMode>>(&mut self, iterator: T)
impl PartialEq<SslVerifyMode> for SslVerifyMode
fn eq(&self, other: &SslVerifyMode) -> bool
fn ne(&self, other: &SslVerifyMode) -> bool
impl Ord for SslVerifyMode
fn cmp(&self, other: &SslVerifyMode) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
1.21.0[src]
fn clamp(self, min: Self, max: Self) -> Self
[src]
impl Copy for SslVerifyMode
impl Hash for SslVerifyMode
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
impl Sub<SslVerifyMode> for SslVerifyMode
type Output = SslVerifyMode
The resulting type after applying the -
operator.
fn sub(self, other: SslVerifyMode) -> SslVerifyMode
Returns the set difference of the two sets of flags.
impl SubAssign<SslVerifyMode> for SslVerifyMode
fn sub_assign(&mut self, other: SslVerifyMode)
Disables all flags enabled in the set.
impl Not for SslVerifyMode
type Output = SslVerifyMode
The resulting type after applying the !
operator.
fn not(self) -> SslVerifyMode
Returns the complement of this set of flags.
impl BitAnd<SslVerifyMode> for SslVerifyMode
type Output = SslVerifyMode
The resulting type after applying the &
operator.
fn bitand(self, other: SslVerifyMode) -> SslVerifyMode
Returns the intersection between the two sets of flags.
impl BitOr<SslVerifyMode> for SslVerifyMode
type Output = SslVerifyMode
The resulting type after applying the |
operator.
fn bitor(self, other: SslVerifyMode) -> SslVerifyMode
Returns the union of the two sets of flags.
impl BitXor<SslVerifyMode> for SslVerifyMode
type Output = SslVerifyMode
The resulting type after applying the ^
operator.
fn bitxor(self, other: SslVerifyMode) -> SslVerifyMode
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<SslVerifyMode> for SslVerifyMode
fn bitand_assign(&mut self, other: SslVerifyMode)
Disables all flags disabled in the set.
impl BitOrAssign<SslVerifyMode> for SslVerifyMode
fn bitor_assign(&mut self, other: SslVerifyMode)
Adds the set of flags.
impl BitXorAssign<SslVerifyMode> for SslVerifyMode
fn bitxor_assign(&mut self, other: SslVerifyMode)
Toggles the set of flags.
impl Debug for SslVerifyMode
impl FromIterator<SslVerifyMode> for SslVerifyMode
fn from_iter<T: IntoIterator<Item = SslVerifyMode>>(
iterator: T
) -> SslVerifyMode
iterator: T
) -> SslVerifyMode
impl Octal for SslVerifyMode
impl Binary for SslVerifyMode
impl LowerHex for SslVerifyMode
impl UpperHex for SslVerifyMode
Auto Trait Implementations
impl Send for SslVerifyMode
impl Unpin for SslVerifyMode
impl Sync for SslVerifyMode
impl UnwindSafe for SslVerifyMode
impl RefUnwindSafe for SslVerifyMode
Blanket Implementations
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,