1.34.0[][src]Trait standback::convert::TryFrom

pub trait TryFrom<T> {
    type Error;
    fn try_from(value: T) -> Result<Self, Self::Error>;
}

Simple and safe type conversions that may fail in a controlled way under some circumstances. It is the reciprocal of TryInto.

This is useful when you are doing a type conversion that may trivially succeed but may also need special handling. For example, there is no way to convert an [i64] into an [i32] using the [From] trait, because an [i64] may contain a value that an [i32] cannot represent and so the conversion would lose data. This might be handled by truncating the [i64] to an [i32] (essentially giving the [i64]'s value modulo i32::MAX) or by simply returning i32::MAX, or by some other method. The [From] trait is intended for perfect conversions, so the TryFrom trait informs the programmer when a type conversion could go bad and lets them decide how to handle it.

Generic Implementations

TryFrom<T> can be implemented as follows:

use std::convert::TryFrom;

struct GreaterThanZero(i32);

impl TryFrom<i32> for GreaterThanZero {
    type Error = &'static str;

    fn try_from(value: i32) -> Result<Self, Self::Error> {
        if value <= 0 {
            Err("GreaterThanZero only accepts value superior than zero!")
        } else {
            Ok(GreaterThanZero(value))
        }
    }
}

Examples

As described, [i32] implements TryFrom<[i64]>:

use std::convert::TryFrom;

let big_number = 1_000_000_000_000i64;
// Silently truncates `big_number`, requires detecting
// and handling the truncation after the fact.
let smaller_number = big_number as i32;
assert_eq!(smaller_number, -727379968);

// Returns an error because `big_number` is too big to
// fit in an `i32`.
let try_smaller_number = i32::try_from(big_number);
assert!(try_smaller_number.is_err());

// Returns `Ok(3)`.
let try_successful_smaller_number = i32::try_from(3);
assert!(try_successful_smaller_number.is_ok());

Associated Types

type Error

The type returned in the event of a conversion error.

Loading content...

Required methods

fn try_from(value: T) -> Result<Self, Self::Error>

Performs the conversion.

Loading content...

Implementations on Foreign Types

impl TryFrom<i128> for u16[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<u16, <u16 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for i128[src]

type Error = TryFromIntError

fn try_from(value: usize) -> Result<i128, <i128 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for u8[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<u8, <u8 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for u32[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<u32, <u32 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for u128[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<u128, <u128 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for u32[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<u32, <u32 as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i16> for u32[src]

type Error = TryFromIntError

fn try_from(u: i16) -> Result<u32, <u32 as TryFrom<i16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for i128[src]

type Error = TryFromIntError

fn try_from(value: isize) -> Result<i128, <i128 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for u128[src]

type Error = TryFromIntError

fn try_from(u: i32) -> Result<u128, <u128 as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for usize[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<usize, <usize as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for isize[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<isize, <isize as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for i16[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<i16, <i16 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u64> for isize[src]

type Error = TryFromIntError

fn try_from(u: u64) -> Result<isize, <isize as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for i16[src]

type Error = TryFromIntError

fn try_from(u: i32) -> Result<i16, <i16 as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for u8[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<u8, <u8 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for isize[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<isize, <isize as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for usize[src]

type Error = TryFromIntError

fn try_from(u: i32) -> Result<usize, <usize as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for u8[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<u8, <u8 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i8> for u128[src]

type Error = TryFromIntError

fn try_from(u: i8) -> Result<u128, <u128 as TryFrom<i8>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u64> for u8[src]

type Error = TryFromIntError

fn try_from(u: u64) -> Result<u8, <u8 as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for u64[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<u64, <u64 as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for i16[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<i16, <i16 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for i8[src]

type Error = TryFromIntError

fn try_from(u: i32) -> Result<i8, <i8 as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for i16[src]

type Error = TryFromIntError

fn try_from(u: usize) -> Result<i16, <i16 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl<'a, const N: usize, T> TryFrom<&'a [T]> for &'a [T; N] where
    [T; N]: LengthAtMost32
[src]

type Error = TryFromSliceError

impl TryFrom<u64> for u32[src]

type Error = TryFromIntError

fn try_from(u: u64) -> Result<u32, <u32 as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for isize[src]

type Error = TryFromIntError

fn try_from(value: i32) -> Result<isize, <isize as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u32> for char[src]

type Error = CharTryFromError

impl TryFrom<u32> for i16[src]

type Error = TryFromIntError

fn try_from(u: u32) -> Result<i16, <i16 as TryFrom<u32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for u64[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<u64, <u64 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for i32[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<i32, <i32 as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i8> for usize[src]

type Error = TryFromIntError

fn try_from(u: i8) -> Result<usize, <usize as TryFrom<i8>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for i16[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<i16, <i16 as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for i64[src]

type Error = TryFromIntError

fn try_from(u: usize) -> Result<i64, <i64 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for i32[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<i32, <i32 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for i16[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<i16, <i16 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for u128[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<u128, <u128 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for u64[src]

type Error = TryFromIntError

fn try_from(u: i32) -> Result<u64, <u64 as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for u8[src]

type Error = TryFromIntError

fn try_from(u: i32) -> Result<u8, <u8 as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for i32[src]

type Error = TryFromIntError

fn try_from(u: usize) -> Result<i32, <i32 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for usize[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<usize, <usize as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for i64[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<i64, <i64 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u32> for u8[src]

type Error = TryFromIntError

fn try_from(u: u32) -> Result<u8, <u8 as TryFrom<u32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for u32[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<u32, <u32 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u64> for usize[src]

type Error = TryFromIntError

fn try_from(value: u64) -> Result<usize, <usize as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u32> for usize[src]

type Error = TryFromIntError

fn try_from(value: u32) -> Result<usize, <usize as TryFrom<u32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u16> for i8[src]

type Error = TryFromIntError

fn try_from(u: u16) -> Result<i8, <i8 as TryFrom<u16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u64> for i32[src]

type Error = TryFromIntError

fn try_from(u: u64) -> Result<i32, <i32 as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for u16[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<u16, <u16 as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u32> for i32[src]

type Error = TryFromIntError

fn try_from(u: u32) -> Result<i32, <i32 as TryFrom<u32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for i64[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<i64, <i64 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for i8[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<i8, <i8 as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for isize[src]

type Error = TryFromIntError

fn try_from(u: usize) -> Result<isize, <isize as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i16> for u16[src]

type Error = TryFromIntError

fn try_from(u: i16) -> Result<u16, <u16 as TryFrom<i16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for u16[src]

type Error = TryFromIntError

fn try_from(u: usize) -> Result<u16, <u16 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for i32[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<i32, <i32 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i8> for u32[src]

type Error = TryFromIntError

fn try_from(u: i8) -> Result<u32, <u32 as TryFrom<i8>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl<'a, const N: usize, T> TryFrom<&'a mut [T]> for &'a mut [T; N] where
    [T; N]: LengthAtMost32
[src]

type Error = TryFromSliceError

impl TryFrom<i16> for u8[src]

type Error = TryFromIntError

fn try_from(u: i16) -> Result<u8, <u8 as TryFrom<i16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl<'_, const N: usize, T> TryFrom<&'_ [T]> for [T; N] where
    T: Copy,
    [T; N]: LengthAtMost32
[src]

type Error = TryFromSliceError

impl TryFrom<u64> for i16[src]

type Error = TryFromIntError

fn try_from(u: u64) -> Result<i16, <i16 as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for i32[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<i32, <i32 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for u64[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<u64, <u64 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i8> for u64[src]

type Error = TryFromIntError

fn try_from(u: i8) -> Result<u64, <u64 as TryFrom<i8>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i8> for u16[src]

type Error = TryFromIntError

fn try_from(u: i8) -> Result<u16, <u16 as TryFrom<i8>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for u64[src]

type Error = TryFromIntError

fn try_from(value: usize) -> Result<u64, <u64 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u64> for i64[src]

type Error = TryFromIntError

fn try_from(u: u64) -> Result<i64, <i64 as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i8> for u8[src]

type Error = TryFromIntError

fn try_from(u: i8) -> Result<u8, <u8 as TryFrom<i8>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u32> for isize[src]

type Error = TryFromIntError

fn try_from(value: u32) -> Result<isize, <isize as TryFrom<u32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u8> for i8[src]

type Error = TryFromIntError

fn try_from(u: u8) -> Result<i8, <i8 as TryFrom<u8>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u16> for u8[src]

type Error = TryFromIntError

fn try_from(u: u16) -> Result<u8, <u8 as TryFrom<u16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for u128[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<u128, <u128 as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for i128[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<i128, <i128 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for usize[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<usize, <usize as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for i8[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<i8, <i8 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for u128[src]

type Error = TryFromIntError

fn try_from(value: usize) -> Result<u128, <u128 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u64> for u16[src]

type Error = TryFromIntError

fn try_from(u: u64) -> Result<u16, <u16 as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for u8[src]

type Error = TryFromIntError

fn try_from(u: usize) -> Result<u8, <u8 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i16> for u128[src]

type Error = TryFromIntError

fn try_from(u: i16) -> Result<u128, <u128 as TryFrom<i16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for i64[src]

type Error = TryFromIntError

fn try_from(value: isize) -> Result<i64, <i64 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for u8[src]

type Error = TryFromIntError

fn try_from(u: i64) -> Result<u8, <u8 as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u32> for i8[src]

type Error = TryFromIntError

fn try_from(u: u32) -> Result<i8, <i8 as TryFrom<u32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for u16[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<u16, <u16 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u16> for i16[src]

type Error = TryFromIntError

fn try_from(u: u16) -> Result<i16, <i16 as TryFrom<u16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for u32[src]

type Error = TryFromIntError

fn try_from(u: i32) -> Result<u32, <u32 as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for u32[src]

type Error = TryFromIntError

fn try_from(u: usize) -> Result<u32, <u32 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for usize[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<usize, <usize as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for isize[src]

type Error = TryFromIntError

fn try_from(value: i64) -> Result<isize, <isize as TryFrom<i64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i16> for i8[src]

type Error = TryFromIntError

fn try_from(u: i16) -> Result<i8, <i8 as TryFrom<i16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for i8[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<i8, <i8 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for u16[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<u16, <u16 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u64> for i8[src]

type Error = TryFromIntError

fn try_from(u: u64) -> Result<i8, <i8 as TryFrom<u64>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for i8[src]

type Error = TryFromIntError

fn try_from(u: u128) -> Result<i8, <i8 as TryFrom<u128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for u32[src]

type Error = TryFromIntError

fn try_from(u: i128) -> Result<u32, <u32 as TryFrom<i128>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u32> for u16[src]

type Error = TryFromIntError

fn try_from(u: u32) -> Result<u16, <u16 as TryFrom<u32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i16> for usize[src]

type Error = TryFromIntError

fn try_from(u: i16) -> Result<usize, <usize as TryFrom<i16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for u64[src]

type Error = TryFromIntError

fn try_from(u: isize) -> Result<u64, <u64 as TryFrom<isize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for u16[src]

type Error = TryFromIntError

fn try_from(u: i32) -> Result<u16, <u16 as TryFrom<i32>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i16> for u64[src]

type Error = TryFromIntError

fn try_from(u: i16) -> Result<u64, <u64 as TryFrom<i16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u16> for isize[src]

type Error = TryFromIntError

fn try_from(value: u16) -> Result<isize, <isize as TryFrom<u16>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for i8[src]

type Error = TryFromIntError

fn try_from(u: usize) -> Result<i8, <i8 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl<const N: usize, T> TryFrom<Box<[T]>> for Box<[T; N]> where
    [T; N]: LengthAtMost32
[src]

type Error = Box<[T]>

impl<const N: usize, T> TryFrom<Arc<[T]>> for Arc<[T; N]> where
    [T; N]: LengthAtMost32
[src]

type Error = Arc<[T]>

impl<const N: usize, T> TryFrom<Rc<[T]>> for Rc<[T; N]> where
    [T; N]: LengthAtMost32
[src]

type Error = Rc<[T]>

Loading content...

Implementors

impl<T, U> TryFrom<U> for T where
    U: Into<T>, 
[src]

type Error = Infallible

Loading content...